The Treatment

All week, it’s been hot and humid with dark clouds threatening storms, and today was no exception.

Still, our beekeeping duties required us to suit up and treat the hives for Varroa. Because I wield the magic wand (our vaporizer), I had the added pleasure of an N95 mask and safety goggles. It was Very Hot.

Using a vaporizer to treat with oxalic acid is usually pretty simple. You block the entrances, put the powder on the little tray, slide the tray into the hive, attach the leads to a battery, and leave the vapor to permeate the hive for the alloted amount of time.

Easy-peasy.

However, when you have honey supers on a hive, you have to take them off the hive to treat because oxalic acid guidelines say honey that’s been treated with OA shouldn’t be consumed by humans.

That’s how the guidelines stand at present, although the prevailing wisdom seems to be moving away from that idea because oxalic acid is a naturally occurring substance. On February 23, 2021 the FDA finalized a ruling that establishes an exemption from the requirement of a tolerance for residues of oxalic acid in honey and honeycomb.  

Nonetheless, “Bee Culture” magazine says this doesn’t mean we can all start treating our hives with honey supers on. So, we either take them off to treat with oxalic acid, or we use Formic Pro, which can be used with supers.

Formic Pro also has the advantage of killing Varroa that are in cells of capped brood. But it takes longer (14-20 days instead of minutes [or in today’s case, about an hour]), can only be used in a certain temperature range, and kills some bees along with the Varroa. Since one of bees that it may kill could be the queen, this can be a serious disadvantage.

In our situation, we have a new queen in OH, Girls who hasn’t started laying and possibly a new queen who’s not yet laying or a new queen in the works in the OH, Girls split. As a result, two of our three hives have no brood to worry about.

Meanwhile, in the Kremlin, Olga’s laying is a little spotty, and we treated that hive when it arrived as a package.

We decided to use oxalic acid on all three hives even though we’d have to get the bees out of OH, Girls’ supers.

In the past, we’ve had no problem using our escape board to accomplish this.

We insert the board between the supers and the deeps with the triangles down and leave it in for twenty-four to forty-eight hours. The bees seem to find their way down into the brood boxes for the night, but have problems finding their way back up. There are always a few stragglers left in the supers and/or the board, but they’re easily dealt with.

Today, however, the bottom of the board was seething with bees.

After regrouping, The Engineer and I decided to cover the hole in the escape board and treat the hive with the board in place.

Filed under “other problems” was the fact that the front porch of the hive was also loaded with bees who didn’t take kindly to me trying to move them either in or out of the hive so I could block the entrance to treat the hive.

Then, the part of the vaporizer that actually does that blocking fell off, and we had to sort of hold it in place while the vaporizer was working.

We were about halfway through the treatment when The Engineer realized we hadn’t replaced the bottom board. This meant all the vapor that was going in the hive was coming right back out of the hive through the screen at the bottom.

It was like a slapstick movie where Laurel and Hardy take up beekeeping.

Out came the vaporizer. In went the bottom board. And we started all over again.

The bees were delighted with these developments.
Not.

Also, we discovered a few guard bees took their jobs very seriously, butting our veils repeatedly.

Have I mentioned how much I love my hat and veil?

What a relief it was to finish that hive and replace the supers and quilt box!

We’d hoped to be able to pull some frames for extraction, but though most were full of honey and nectar, none were completely capped. 😦

Our best bet for getting the bees on the escape board back into the hive seemed to be to tip it in front so they could walk in.

A LOT of Bees

For comparison, here’s a photo from two years ago when we used the escape board to get bees out of the supers so we could extract.

Normally, the walking back in process takes a short time, even with lots of bees. This time, the bees on the board seemed reluctant to abandon it. The picture above was taken about thirty minutes after we finished treating, and it was over an hour later before the board was mostly empty.

Clearly, this hive is very full despite having been split a month ago, and we’ll need to keep a close eye on it, especially once the new queen starts laying.

Despite the rivulets of sweat pouring down our faces and OH, Girls’ diligent guard bees trying to convince us we should abandon our tasks, we managed to treat the other two hives without incident.

What’s next on our beekeeping schedule? We’ll need to do full hive checks on all three hives, looking to see if the new OH, Girls queen has begun laying, if Olga’s prowess at egg laying has improved, and if the split has managed to requeen.

For now, that’s all the news from the OH, Honey! beeyard.

We Had a Plan

A quick, mostly pictorial update on the hives.

The California Girls hive needed split, we both agreed. The queen’s laying pattern was spotty, and they’d be more likely to get through winter with a locally born and mated queen. Or so we’ve been told.

We gathered the boxes and frames needed to make the split, but chose to check Buzzers’ Roost (II) first.

The hive was packed with bees, with many, many uncapped queen cups.

Last time we had a hive in similar condition, it was FreeBees. With them, we waited a few weeks to make a split, and they ended up swarming anyway.

Determined to avoid a similar error with Buzzers’ Roost (II), we adjusted our plan, and split the hive by taking out a few frames of brood and eggs, shaking in some nurse bees, adding frames of honey and pollen, and giving them sugar water and pollen patties.

We’ll check back in a few weeks and hope to see fresh eggs and larvae. If we don’t see this, we’ll make a decision whether to buy a queen or reunite them with their mother hive and let them swarm (and hope to catch it).

Both hives had tons of pollen, more than I’ve ever seen stored before in one of our hives.

Here are some pictures of Buzzers’ stores.

When we smoke the hive to inspect, the bees sometimes react by sticking their heads in the cells, supposedly to gorge on pollen and nectar in case they have to flee the danger.
The little things on the bottom that look like Kix cereal are capped drone brood.
More colorful pollen, along with glistening nectar. They were also capping honey, but apparently I didn’t get a picture of that.

There were a lot of bees. Nearly every frame was full.

Now we just have to hope the split raises a queen.

Next we turned to California Girls. They’ve also been busy raising babies, but fortunately weren’t quite as crowded as Buzzers.

Here’s a nice frame of brood. See the freshly capped honey at the top left and drone brood on the bottom?

The queen is laying better now. Look closely, and you’ll see the tiny eggs in almost every cell – much nicer than last inspection when she was laying unevenly.

You can also see some larvae in the lower left.

The picture below has everything but pollen! There’s nectar, a few capped brood cells, honey and eggs!

We also saw the queen, always a welcome sight!

And remember this?

And this?

Well, look at it now!

It’s the comb they started building down from the inner cover several weeks ago that we rubber banded to a frame. They’ve filled in almost the whole frame!

If you’re observant, you may notice something about the size of the cells. They’re bigger than usual, which means they’ve been built for drone brood.

This is something we’ll have to keep an eye on because varroa love drone brood, and we don’t want to encourage varroa in our hives. Also, we don’t need that many drones unless we were getting into some serious queen raising, which we’re not.

We did end up putting the honey super we’d intended for Buzzers on California Girls. There’s definitely a nectar flow on, and they’re doing well so we’re giving them space to store it all. It may come off when we split that hive, but that’s a judgment call we’ll make at the time.

On the “Decluttr Kym” front, I sorted out my jeans and am embarrassed to report I gleaned six pairs to donate without even having to think much about it.

And, lastly, the unrest here has caused me to realize our country can’t move forward until we finally admit we were founded on the backbreaking labor of slaves. I’ve heard people say, “That’s over a hundred years ago. It’s ancient history.”

But as a genealogist, I’ve learned a hundred and some years is not ancient history. It’s just a few generations back, and that history creates a culture, both familial and community, that directs our present.

We can’t forget this happened, and although I’m not sure what I can do personally, I know the first step is to learn more about my personal biases and not be afraid to call out others who express more overt racism.

I will start by reading (no surprise there) and forcing myself to sometimes be the unwelcome voice in the room.

Weight and See

Summer is slowly winding down, and the bees have been making the most of the fine weather. They’ve been in a foraging frenzy, perhaps sensing the forthcoming temperature changes.

They’re finally visiting the goldenrod in their own yard!

It cooled down over the weekend, with rain on and off all day today. Each time the showers stop, the foraging begins again.

And yet, when we checked the hives a week or so ago, Buzzers’ Roost had no honey, and FreeBees had very little. Instead, we saw loads of pollen, lots of nectar, and a surprising amount of capped brood.

Still, with all that nectar, there’s bound to be some honey soon.

Check out the graphs below. Notice any trends?

The first two graphs show the weight of the hive over the last month — finally trending upward. The next two show a week each, and you’ll notice daily ups and downs, probably from when the foragers are out.

So, we’re not too worried about honey levels, at least not yet.

Below is a picture of a frame containing both nectar and pollen. We also found several that were filled solely with nectar or solely with pollen. Theoretically, we should be able to identify the source of the pollen by its color, but unfortunately, I’ve not found an accurate chart online. Here are links to two if you’d like to try: Sheffield Beekeepers’ Association and Metrobeekeepers.net. My guess is mostly goldenrod because the fields are full of it.

While we had the hives open, we did alcohol rolls on both. This is supposed to be a more accurate way to count Varroa.

Our count was a big fat zero on both hives.

Yeah, we must have done it wrong.

Either that or the hive beetles are eating them. Don’t even ask how many of those we found. It was too many to count.

Little bastards.

The weird thing is, the bees mostly ignore the beetles. Once in a while, they’ll herd a particularly brazen one into a corner, but then the bees go back to whatever they were doing, and the beetle scuttles away. (Unless we get it first!)

There was propolis everywhere, especially around the beetle traps, which makes me wonder if this is the bees’ response to the pests. There were a few beetle corpses in some of the propolis, so who knows?

Unfortunately, our girls don’t seem to grasp that the traps are there to help them and had propolized the openings where the beetles are meant to enter. At least one trap had every opening completely blocked.

But let’s get back back to the subject of the main hive pest — the dreaded Varroa. For two years, we’ve used drone foundation as part of Varroa control, with very little success.

Last year, the hive used the drone foundation mostly for honey.

This year, both hives have ignored them.

Until now.

This year, a few short weeks — okay, a few short months — before the workers start kicking out drones (to lower the number of mouths they have to feed in the winter), FreeBees has decided to make drone cells. Half the foundation was full of capped drone brood, and there were more cells on the top of some of the other frames.

Weird. Also unusual in placement. Drone cells are usually at the bottom of hive frames.

Whatever. It’s their hive. They can do what they want.

As we’d been instructed, we removed the drone foundation and opened the cells to check for Varroa, but found none there either.

I can’t believe there are no mites at all, but am willing, even eager, to believe the treatments have been working, and the threshold is safely low.

Just to be sure, we will treat both hives with Oxalic Acid before winter after we take off the supers.

I’m still holding out hope that we might be able to pull at least one frame of honey for ourselves.

Shaken, Not Stirred: Performing A Sugar Shake/Roll

Check out what our queens have been up to!

This frame is from Buzzers’ Roost (the weaker, over-wintered hive). Look at all that lovely covered brood. These are two sides of one frame. Notice the glistening nectar on the left in the top photo? And can you spot the queen? We were happy to see she’s now laying in the deep box instead of the smaller medium one from the winter (also referred to as a super).IMG_0185
IMG_0186

Here’s a frame full of larvae and eggs.IMG_0187

And this one had pollen (near bottom), capped honey (bottom right), some capped brood, and larvae. If you can’t see the difference, here’s a great post from BackYardHive on identifying types of comb. You’ll notice they use different style hives, but the comb is the same. IMG_0188FreeBees also moved up into the deep box we put on last week. IMG_0192See the difference in the color of the bees? Buzzers’ Roost bees are still mainly Italian (offspring of the ill-fated Red Queen), and the FreeBees hive is Saskatraz. We’ll notice a shift in Buzzers’ Roost as the eggs and larvae from the Saskatraz queen emerge and take over.IMG_0193IMG_0192I think we counted about seven and a half frames full of brood in FreeBees. At about 7,000 cells per frame (3,500 a side), that’s a lot of bees! I keep thinking I must have mis-counted, and I didn’t write that figure down (too busy taking pictures and running the timer for the Varroa check).

Part of this week’s inspection was a sugar shake (also called a sugar roll) to check for Varroa. It was much easier this time, partly because we’d done it before, and partly because we used the University of Minnesota’s scooping method to measure out the 1/2 cup of bees (about 300) needed for the sample.

Basically, we measure out the bees, dump them in a jar with a mesh lid, measure in a couple of tablespoons of powdered sugar, roll or shake until they’re covered.IMG_0184After letting them set for several minutes, we shake the sugar onto a paper plate, wet it to make it melt, and count the Varroa.

Now, you’re wondering, “But what about the bees?”

Here’s the answer. IMG_0195-2When the sugar-covered, unhappy bees settle, we dump them back into the hive with an interesting story to tell their sisters. They immediately started fanning, (perhaps to spread the word), which you can see in the video below. (I’ve discovered that I seem to be able to upload videos to WordPress from my iPad, but not my computer of phone. Weird.) If you’re going to do a sugar shake/roll, here’s a pdf, also from the University of Minnesota’s Bee Lab. Please follow their precise directions, and not my description above!

Lastly, we replaced the pollen patty on Buzzers’ Roost and gave one to FreeBees. We’ve noticed Small Hive Beetles come around whenever we feed this way, so if you do it, be sure to put in a beetle trap or two, and check them regularly. The Buzzers’ Roost trap caught several SHB last week, and I took great delight in seeing them do the dead beetle float in the olive oil. IMG_0194-2Despite not finding any Varroa in our sugar shake, I know they are lurking in all that beautiful capped brood, especially in FreeBees. That hive now has enough bees, and we’ll do a Formic Pro treatment as soon as we get a spell of weather cool enough for the process. This week’s temperatures are predicted to be in the 90s, so perhaps the next week will be better.

We’ll also be keeping an eye on Buzzers’ and doing another sugar shake for both hives in early August, treating again as necessary.

Death Comes to Buzzers’ Roost (Again)

Dead bees are part of beekeeping, just as death is part of life. That knowledge doesn’t make it any easier to see a sight like the one below, especially when we know it was caused by our actions. (Please excuse the blurred picture. I didn’t have on my bee jacket, veil, or hat, and the girls get a little testy after this treatment.)

These bees died after we used Mite Away Quick Strips (MAQS) to treat for Varroa. You may recall my post last fall about our experience with MAQS. We had problems with Yellow Jackets raiding the hive through the wide-open front entrance although I don’t remember this many dead bees. We might have been so focused on the Yellow Jackets that we didn’t notice.

So, why use MAQS? There are several good reasons. It’s the only treatment currently available that kills mites on capped brood and the only one you can use with honey supers on the hive. More importantly, responsible beekeepers employ Integrated Pest Management (IPM) using a variety of treatments. This helps decrease the likelihood of the mites developing resistance to a particular treatment.

Our treatment plan includes MAQS, Oxalic Acid vaporizing, and drone frames. If we ever manage to get a large enough hive to split, we’ll do that too.

We also use a sticky board and sugar roll to count our mite load and plan to try an alcohol wash this season just to get an idea of how many mites the sugar method is missing.

Though it looks horrible, having this many bees die is not a tragedy, but a side-effect. It’s better than helping cause a treatment to become useless. And it’s much better than allowing the Varroa load to get high enough to cause a hive collapse .

Because when a hive collapses, the bees that survive join other hives in the area.

The mites go with them, starting the problem all over for whichever beekeeper happens to be unfortunate enough to live nearby.

For more information on IPM, visit the following sites.

Ohio State University Bee Lab

Mid-Atlantic Apicultural Research & Extension Consortium


Oxalic Acid and Sugar Patties

It was warm again on Monday, so we borrowed the backup battery from our sump pump to power the vaporizer for an Oxalic Acid treatment. (And when I say “we,” I mean The Engineer muscled the thing upstairs and into the wheelbarrow for me to cart it outside and treat the bees.)

Bees don’t much care for  these treatments, and I don’t blame them. As implied by the name, the vaporizer fills the hive with Oxalic Acid vapor to kill Varroa mites — not a pleasant experience, I’m sure. It’s no surprise many chose went for a cleansing flight afterward. (Go here to watch them in motion.) I watched them for a few minutes before going back inside.IMG_3283
I heard it immediately after closing the door — the telltale buzz of a bee in the house — and mentally kicked myself for not checking my clothing.

I carefully took off my jacket and shook it.

No bee.

Convinced one was caught in my hair, I gingerly ran my fingers through the tangles.

No joy.

The buzz continued. Was I imagining things?

I went in the bathroom, examined what I could see of my back. Still no bee.

I took off my shirt, gave it a gentle shake.

No bee.

My jeans.

The buzzing continued, and I was starting to feel like a character in a sitcom.

Finally, I realized the sound was louder in the foyer, and looked up to see one of our girls banging on the second story window.

Sighing with relief, I grabbed a glass to catch her, released her outside, and watched as she flew straight back to the hive.

Even though a hive has thousands of bees, no beekeeper likes to be the cause of harm to even a single bee. Plus, in many cultures, having a bee come in the house is either good luck, or a sign of company is coming. Obviously, this only holds true if you don’t kill it. So, next time you find one in your house, use a glass and a piece of paper to catch and release her. I’m pretty sure there’s no such superstition about Yellow Jackets. Just sayin’.

Friday, we again had a look inside the hive. The weather has been changeable, the temperature readout extremely variable, and we had no idea how much sugar our bees might have consumed in ten days. As you can see from the pictures below, the answer turned out to be not much. IMG_3286IMG_3287
They were more interested in the pollen patty in the corner, which led me to surmise (possibly erroneously) they still have honey.

We’ll continue checking when weather permits, and I’ll keep you posted.

Until then, bee happy. 🙂

 

 

 

So, You Want to Be a Beekeeper? Prepare to Occasionally Feel Very Stupid

If you read my last post, including updates, you will see I was quite wrong about several things.

  • Although I knew drones were bigger than workers, the large eyes of the bee in the “stand-off” photos convinced me it was a drone, despite it not having a blunt body and being the same size as the other bee.
  • When we tested for Foulbrood and the test was negative, I assumed (always a mistake), our bees were in the clear. Wrong again. They have Parasitical Mite Syndrome, which means their chances of making it to spring are slim indeed.

And yet, as one reader commented about the Yellow Jackets, we can’t give up until the bees do. As long as they are alive, we will continue to do everything we can to give every chance possible to survive.

What this means in practical terms is pretty much following the winter strategy we had already decided on.

  1. Feed them as much as they want to take.
  2. Treat them again for Varroa (this time with a vaporizer).
  3. Winterize their hive with insulation and a wrap.

If they don’t survive, our next bees will benefit from this year’s bees’ work by starting with drawn comb instead of foundation and having honey, rather than sugar water, as food if they need it.

So, lessons learned:

  1. Beekeeping has a steep learning curve. There is much to know, and I don’t think anyone can become an expert in a day (if ever).
  2. Sometimes, you just have to do what you can and trust your bees to know what’s best for them.
  3. If you are the sort of person who wants to feel smart and be right all the time, beekeeping is probably not for you.
  4. Some hives thrive despite ignorance and lack of care.
  5. Other hives fail no matter how much care and thought they are given.
  6. Use drone frames early, and make sure you take them out before the drones (and Varroa) emerge.
  7. Treat for Varroa. Just assume your hives have them. They do.
  8. When you put out dry pollen for your bees, every bee in a five mile radius will come to call.
  9. Everyone has different ideas about how to do things. Some of these strategies may work for you. Some won’t.
  10. Because every hive is different.
  11. In no way does the above truth excuse you from learning as much as you can.

 

 

Heartbreak

Yesterday, we inserted the Mite Away Quick Strips (MAQS).

Using them meant removing the entrance reducer, so we worried about the vile and predatory Yellow Jackets who have plagued us and our hive. Of course, we were also concerned about the possible side-effects of the MAQS (dead bees, rejected queen).

However, if we didn’t treat the hive, the Varroa would continue to proliferate, debilitating our bees so they probably wouldn’t last the winter. If they somehow managed to survive the cold, the viruses carried by the mites would weaken them enough that they wouldn’t thrive next year.

There were no good choices.

This morning, when we went to have a look at the hive, we found this. IMG_2845

The little white things — that I initially thought were bits of paper from the strips — are larvae.

As I slowly absorbed that fact, with all its implications, a Yellow Jacket flew past the bees milling on the front porch and straight into the hive.

As if she owned it. As if it had been her who had raised and cared for those larvae, fed the queen, foraged for pollen and nectar, and fanned that nectar until the water evaporated to 18%, and it became honey. As if it were she — and not our hard-working girls — who had given everything for the hive.

The view from beneath the hive was equally dire. Bees milled around scattered larvae and another Yellow Jacket sauntered around like our hive was a buffet for her and her sisters.

I felt sick.

There was no clear course of action, nothing we could do without consequence. If we put the reducer back on, it would limit the space the bees needed to defend, but also limit the air circulation they need for the MAQS treatment. If we left it off, the Yellow Jackets would decimate what was left of the hive.

The Engineer made the call, not that it really mattered. The fumes will get them or the Yellow Jackets will. The chance of our bees recovering from a catastrophe of such magnitude at this time of the year is so small as to be almost non-existent.

Still, when the required seven days of treatment are over, and we can once again feed them, we’ll do so. Assuming there are any bees left to feed.

Even if there are, it’s almost certainly too late for them to raise another brood to take the hive through the winter.

My thoughts jump ahead — to next year, and what we can do differently. We’ll buy a package so we can start earlier, put the drone boards in immediately, treat the hive in the spring for Varroa, move it to the sunnier location that opened up when some trees fell this year.

Next year, we will do better.

For now though, I am heartbroken.

Small Pests = Mite-y Problems

I can’t say they didn’t warn us. At our Intro to Beekeeping class, the teachers all said the Varroa Mite population would explode in the late summer and fall.

They were right. Although our sugar roll count in late August seemed borderline, our bee guru thought our bees needed treating.

On her advice, we began by putting in two drone frames and dusting the brood boxes with powdered sugar. Supposedly, the powdered sugar encourages bees to groom themselves and each other, thereby clearing away some of the mites.

Well, maybe. The sticky board count afterwards was unequivocally bad, though part of that might be due to the bees’ hygienic efforts. And our bees did build some drone comb on one board, resulting in about 15-20 capped drone cells. (If you recall, Varroa prefer drone larvae because they are larger, and their growth cycle more closely matches that of the Varroa).

FullSizeRender-21

You remember drone cells, right? They look like Kix cereal.

The important thing about using drone frames is to be sure to take it out after the cells are capped but before the bees (and Varroa) hatch.

I’m going to repeat that yet another time because it’s really, really(!) important. YOU HAVE TO REMOVE THE DRONE FRAMES AFTER THE DRONE CELLS ARE CAPPED BUT BEFORE THE BEES AND VARROA HATCH! Otherwise you have a drone population explosion. Worse, you’ve just created a Varroa bomb in your own hive.

After you remove the drone frames, you uncap the cells. Here’s what we found. See those little specks?

IMG_2741I’m pointing to one with my uncapping tool below.FullSizeRender-22

Those are Varroa Mites. They carry deadly viruses and can lead to a colony’s die-off. (Click the link for more information from MSU’s Pollinator Initiative).  It was horrifying to see so many in such a small part of our hive.

Next year, we’ll be putting in drone frames as soon as our queen starts laying. This year, however, we’ll be inserting Mite Away Quick Strips as soon as the weather cools. These have a good track record of treating Varroa and Tracheal Mites in both capped brood and   the bee population. They can also be used while honey supers are on.

The downsides? They can’t be used if it’s over 92 degrees, and they have to be on the hive for at least seven days. They also get expensive if you use them regularly.

We planned to insert them yesterday, but the weather’s been hot for this time of the year, with expected highs in the upper 80s this week — too close to 92 to risk it.

There are some other concerns:

  • Treatment requires taking out the entrance reducer, and yellow jackets are still looking for a way in.
  • There may be bee die-off.
  • The treatment may cause the bees to reject the queen. (And this is not a good time of year to lose a queen.)

Still, I don’t believe we have a choice if we want to give our girls a fighting chance to get through the winter.

I’m starting to think beekeeping is a continuous cycle of choosing the lesser of two evils.

Other news on the pest front: our Beetle Jails  continue to catch Small Hive Beetles. When we first received the Jail and Beetle Blaster in our Ohio State Beekeepers Association Apiary Diagnostic Kit, we baited them with apple cider vinegar and caught nothing.

Then we tried the recipe printed in the “Monitoring for Sustainability” handbook (also in the OSBA APK). I’m sharing it below because it works. In fact, the Beetle Jail, paired w.ith this recipe, has been so effective, I invested in several more traps. So here’s the recipe: one slice of banana, one spoon of high protein brood builder (I’ve been using pollen powder substitute), one spoon of honey, a pinch of yeast (they prefer Brewer’s, but I had regular bread yeast, and it’s worked fine), and a spoon of water. Let ferment overnight, mix well, and put a few drops in each trap.

And go for the Beetle Jail traps. The other ones don’t work as well.

I’ll let you know how the MAQS treatment goes.

 

 

Fine, But Not Yet Super-Fine

Our bees are fine, thanks for asking.

I spent Saturday evening  “coloring” the frames of one of our honey supers with beeswax. This is meant to encourage the bees to go into the new box and begin using those frames.FullSizeRender-18

We’re determined to keep a close watch on the pest levels in the hives, so Saturday morning, The Engineer spread Vaseline on a sticky board and put it beneath the hive.

When we did a hive check Sunday,  we counted the Varroa. There were seven. At this point, that count is more a benchmark, but with all those larvae about to be capped, you know the nasty little creatures will be looking for a home. Also, I read that ants can carry off dead Varroa, and we still see the occasional ant crawling on the hive. So, again, our count may be a little skewed.

IMG_1502

Varroa through a magnifying glass on a sticky board. Photo credit: The Engineer

IMG_2298

If you look closely, you can see the larvae in the lower left corner. There’s capped brood above it and capped honey in the upper right corner. 

The bees are still busy drawing comb, raising young, and gathering nectar and pollen, but in the end, we decided the girls were doing fine, but not quite “super-fine” (i.e., ready for a honey super). Though the bottom box is fairly filled in, the top one only has about four full frames. That’s fine too. Judging by the amount of comb the bees are drawing, that they clearly have designs on the remaining frames. And our Basswood trees are beginning to bloom, so we have high hopes for a honey super in our bees’ futures.  Basswood is considered one of the best North American trees for bees, and we have two.

IMG_2299

Look at that gorgeous freshly drawn comb! Aren’t our girls talented?

This week’s visit wasn’t nearly as exhaustive as last week’s. We pulled the Beetle Blaster and Beetle Jail. There were no beetles in either, but one on the single piece of microfiber the girls deigned to allow in the hive. (You’ll recall I mentioned them pulling one all the way down through the two boxes and out the front of the hive, but they also pulled one down and out the bottom.) Another beetle was in the remains of a pollen patty we took out, so we rinsed and replaced the beetle traps.

In an effort to be less obtrusive, we looked at the frames in the upper box, but only peeked into the lower box, so these pictures are all from the upper chamber. If you look below, you’ll see tiny eggs in the center of most the cells. IMG_2296

We didn’t spot the queen, but we didn’t look too hard. The number of eggs and larvae tell us she’s still active. IMG_2297

And though the consumption of sugar-water has slowed, we replaced the feeder with a fresh one and also put in a fresh pollen patty. I read in one of our manuals that we should allow the bees to ignore three feeders of sugar water before we stop feeding it, so we’re using that as a guideline.

There is an ebb and flow in the amount they drink from the feeder and the amount of pollen patty they consume, as well as the amount of pollen we see them bring in. For about a week, we’d see the foragers come back loaded with pollen. Then, at the beginning of last week, they seemed to have very little. Over the weekend, the pollen loads picked up again.

We pay attention to the color of the pollen, but still have no clue where they’re getting it from. Since we live in the country, we may never know. There are still working farms in our area, at least one orchard, and many home gardeners.

It’s neat to think our bees are traveling the countryside, pollinating crops and flowers, as they gather food for the hive.

Oh, and we saw no queen cups in the upper box, so maybe our girls are feeling a bit more secure. 🙂